Creating a working ship

From Interstellar Rift Wiki
Revision as of 09:43, 30 September 2014 by Hurles (Talk | contribs)

Jump to: navigation, search

This tutorial will teach you how to create a working ship from scratch.

Creating a ship

Interstellar Rift menu
Getting Started

To open the ship editor, click on the ship editor button (the second one from the top)
Editor interface
Moving around

You can use the WASD keys to move the camera and holding the middle mouse button while moving the mouse rotates the camera.
Room Creation
Creating a room

If you left click anywhere, a very small room will be created.
Just to get an idea of the sizes, each tile is 4 meters in every dimension.
To make the room bigger, simply click a tile next to the one you've just created.
Placing Floors
Placing Floors

You can select the type of floor you want and place it on any tile you like. It can be rotated using the arrow keys on your keyboard or dragging your mouse from left to right, while holding the left mouse button. To fill an entire room with a type of floor, shift+click on a tile.
Adding a cockpit
Adding a cockpit

To be able to fly the ship, we have to add a cockpit to the ship. These are located in Room edit mode (F1) -> Systems
In this case I've used the HelmSmall_01.
Dark room
Lights

Pressing the lightbulb icon (default shortcut (B)) on the bottom left of your screen will turn off the lighting of the editor so you can get a better idea of how well lit your ship will be in the final game.
Light at last!
Here we have added some lights to our walls. These lights are located in the "Lights" category in room edit mode (F1)
Creating a new room
Rooms

To create a new room, simply place a door on one of the outer edges of the first one. these are located in the "Doors" category in room edit mode (F1) This will creat a small 1x1 room on the other side of the door.
Selecting a room
You might have noticed that if you hover your mouse over the newly created room, it turns orange. When it is orange, press the room select key (Default key: Spacebar) to select the new room.
Enlarging a room
Once it is selected, you may build the new room like the first one, by adding more tiles to it.
Decoration
Here, the new room is decorated with floors, walls and lights. To flood fill an entire room with a certain type of wall, shift+click with a wall selected.
Adding devices
Adding essential devices

To create a viable ship, we need a couple of essential devices. First of all, we need some power. To start producing power, we place down a Hydrogen Generator TI and a Hydrogen Tank TI. (both are located in the "Systems" category in Prop mode (F2).) Another essential device to a working ship, is a Teleporter. (Located in the "Systems"category in Room edit mode (F1).)
Exterior
As a final touch, we require some engines. Engines can only be placed on the exterior of the ship. To do this we need to activate Exterior Mode (F3).
Placing engines
In exterior mode, we can place engines (Found in the "Engines" category)
Power connection mode
Connecting the powerFinally, we need to connect the power to the essential devices. To do this, activate power connection mode (F4). This will turn the entire ship see-through and only show connectable devices.
Fueling her up
To create any power, we have to connect the fuel to the Hydrogen Generator TI. In power connection mode, click once on the Hydrogen Tank TI. This will change it's caption to CONNECTING. Now, click once on the Hydrogen Generator TI, to connect the fuel line to it.
Selected Hydrogen Generator
To start connecting the other devices, we first need to deselect the Hydrogen Tank TI. This is done by clicking anywhere outside of the ship. Now we can click once on the Hydrogen Generator TI to select it.
Connecting everything else
Now, we click on every other device (except the Hydrogen tank) and power lines will be created between them and the Hydrogen Generator TI. Do not forget connect the cockpit as well.
Ready
Your ship is now ready to fly. Hit the ESC key to save the ship and use it in-game.